Skullcandy is a popular audio electronics company that produces headphones, earbuds, speakers, and other audio devices.
While Skullcandy is perhaps most well-known for its trendy and stylish headphones, the company also produces high-quality audio equipment. In fact, many professional and amateur athletes use Skullcandy headphones to help them train and stay focused while they compete.
Skullcandy has also been a powerful force in the world of action sports. The company sponsors a number of athletes in various disciplines, including skateboarding, skiing, and BMX. Skullcandy products have been featured in many action sports films and videos.
Whether you’re looking for fashionable headphones or high-quality audio equipment, Skullcandy is a brand that you can trust.
Resetting Skullcandy Earbuds & Headphones
If your Skullcandy earbuds or headphones aren’t working properly, there are a few things you can try to reset them.
- Make sure that your earbuds or headphones are charged. If they’re not, connect them to a power source using the included charging cable.
- Try resetting your earbuds or headphones. To do this, press and hold the power button for 10 seconds. You should see a white light flashing when you do this.
- If your earbuds or headphones still aren’t working properly after resetting them, you may need to get in touch with Skullcandy customer service.
- In addition to resetting your Skullcandy earbuds or headphones, there are a few other things you can do to troubleshoot them.
- Check the audio settings on your device to make sure that the earbuds or headphones are set as the default audio output device.
- If you’re using Bluetooth to connect your earbuds or headphones to your device, try resetting the Bluetooth connection. To do this, go to your device’s settings and select “forget” or “unpair” your Skullcandy earbuds or headphones.
How To Reset Skullcandy Indy Evo
[amazon box=”B084SC59D7″ template=”table”]
- Start with the Skullcandy Indy Evo Control turned off.
- Remove each earbud from the charging case.
- Press and hold the button on the back of the left earbud for 10 seconds.
- While still holding the button, insert the left earbud back into the charging case.
- Close the lid of the charging case and wait for the left earbud to turn white.
- Remove the left earbud from the charging case and press and hold the button for 10 seconds.
- While still holding the button, insert the left earbud back into the charging case.
- Close the lid of the charging case and wait for the left earbud to turn white.
- Repeat the process for the right earbud.
After resetting your Skullcandy Indy Evo, you may notice some changes in the way they perform. For example, the reset may improve the battery life or connectivity of your earbuds.
How To Reset Skullcandy Dime Earbuds
[amazon box=”B09NPB1XH4″ template=”table”]
If your Skullcandy Dime earbuds are not working properly, you may need to reset them. Here’s how:
- Make sure that the earbuds are charged. If they are not, connect them to a power source using the USB charging cable.
- Next, press and hold the power button for five seconds. This will turn the earbuds off.
- Once the earbuds are off, press and hold the power button for three seconds. This will turn the earbuds on and reset them.
- If your earbuds still are not working properly after resetting them, you may need to contact Skullcandy customer support for further assistance.
While resetting your Skullcandy Dime earbuds may seem like a difficult task, it is actually quite simple. By following the steps above, you can have your earbuds working like new in no time.
How To Reset Skullcandy Jib Earbuds
[amazon box=”B004MWJRR4″ template=”table”]
If your Skullcandy Jib Wireless in-Ear Earbuds are not working properly, you may need to reset them. Here’s how:
- Turn off your Bluetooth.
- Put your earbuds in their charging case and make sure they are turned off.
- Press and hold the button on the charging case for 10 seconds.
- The charging case’s LED will flash red, then blue.
- Open the lid of the charging case and take out your earbuds.
- Press and hold the button on each earbud for 5 seconds.
- The earbuds will flash blue and white.
- Turn on your Bluetooth and pair your earbuds to your device.
How To Reset Skullcandy Push Earbuds
[amazon box=”B084SBZDL5″ template=”table”]
If your Skullcandy Push earbuds aren’t working properly, it may be time to reset them. Here’s how:
Make sure the earbuds are turned off. Then, press and hold the button on the left earbud for about 10 seconds. You should see a white light flash when you first press the button, and then again when you release it after 10 seconds.
If that doesn’t work, try charging the earbuds for at least 10 minutes. Then, press and hold the button on the right earbud for about 3 seconds. You should see a white light flash.
If your earbuds still aren’t working, you may need to contact Skullcandy customer support for further assistance.
How To Reset Skullcandy Sesh Earbuds
[amazon box=”B07VPX4W35″ template=”table”]
There are a few different ways that you can reset your Skullcandy Sesh earbuds. If you’re having trouble with your earbuds, resetting them may help. Here’s how to do it:
First, make sure that your earbuds are turned off. Then, press and hold the button on the right earbud for about 10 seconds. After that, press and hold the button on the left earbud for about 10 seconds. Finally, press and hold both buttons for about 10 seconds. If done correctly, your earbuds will reset and the light will turn off.
While resetting your Skullcandy Sesh earbuds may fix some issues, it’s not a cure-all. If you’re still having trouble with your earbuds, you may need to contact Skullcandy customer service for further assistance.
How To Reset Skullcandy Crusher Headphones
[amazon box=”B082FSB682″ template=”table”]
If you’re like me, you love your Skullcandy Bluetooth headphones. They’re comfortable, they sound great, and they just overall look cool. But like any piece of technology, they can have their issues. One issue you might face is resetting your headphones. If your headphones are acting up and you want to try resetting them, here’s what you need to do.
First, find the small hole on the back of the left ear cup. This is the reset button. Once you’ve found it, take a paperclip and straighten it out. Then, insert the paperclip into the reset button hole and press and hold for about five seconds. You should see a small LED light on the inside of the ear cup flash. This means the reset is complete and your headphones are now back to their factory settings.
If you’re still having issues with your headphones, Skullcandy has a great warranty and will usually be able to help you out. But if you want to try to fix the issue yourself first, resetting your headphones is a good place to start.
How To Reset Skullcandy Hesh & Riff Headphones
[amazon box=”B0B17QK182″ template=”table”]
To reset your Skullcandy Hesh or Riff headphones, start by putting the headphones into pairing mode. To do this, press and hold the power button for 5 seconds. Once the headphones are in pairing mode, connect them to your device via Bluetooth. Once they are connected, you will hear a voice prompt that says “connected.” At this point, you can release the power button.
If you’re having trouble connecting your Skullcandy headphones wireless to your device, make sure that you are within range of the headphones. The maximum range for Skullcandy headphones is 30 feet. If you’re still having trouble, try restarting your headphones by pressing and holding the power button for 10 seconds.
Skullcandy is a great brand for headphones. They offer a wide range of products that are sure to meet your needs. Whether you’re looking for a simple pair of earbuds or a more complex system, Skullcandy has you covered.
